EX8000

EX8000

EX8000 is one of the most advance tri-band Netgear range extender which includes 5GHZ bandwidth up to 1.7Gbps for extending the existing wireless network. It also offers rare ability to use the same wireless network name and password of your home network. For setup, your extender with ease visit Mywifiext. EX8000 comes up with various different features which can improve the speed, range, and performance of your Wireless network for all the connected Wireless devices around every corner of your home including the garage and backyard of our home as well.

 

Features of EX8000

  • Easy to Install – One key feature of Netgear EX8000 WiFi range extender that it is very easy to install on your laptop or cellphone.
  • Tri-Band – Allowing more devices to connect to your existing wireless network with less interference. It is like having two range extender in one.
  • Speed – Offers more speed to share among different peripheral devices.
  • Congestion – Tri-band increase the bandwidth of your existing wireless network to reduce network congestion.
  • Smart connect – With the smart connect enabled, it gives you 3x faster download and an overall boost to your existing WiFi performance.
  • Data Transfer – Tri-band range extender can simultaneously offer two separate streams of data transfer, doubling the overall output of the 5 GHz network.

In this tri-band network, the first 5 GHz band has a speed of 200 Mbps, and the second 5 GHz band has a speed of 1300 Mbps. The slower and faster devices are separated into different WiFi connections which allows you get the best speed on each of your devices. The 5 GHz band with a combined maximum speed of 200 Mbps and the other 5 GHz Wi-Fi band is used for the faster 802.11ac devices with a combined maximum speed of 1300 Mbps. Effectively both slower and faster devices can run faster and the overall network speed increases by more than two times, from 640 Mbps to 1500 Mbps. All these features of Netgear Ex8000 range extender provide you an ample speed and doubling the overall output of your existing router.

Can’t Connect to MYWIFIEXT?

Netgear Installation setup

Can’t Setup MYWIFIEXT?

Tried several different ways to setup mywifiext, but still can’t connect to mywifiext net. Follow this simple and easy setup process to install your Netgear Range Extender.

 

WIRELESS PROTECTED SETUP (W.P.S)

wifi protected setup

 

– Wireless protected setup (W.P.S) is the easiest way to setup mywifiext.

 

  • For using W.P.S procedure always make sure that the Netgear Wifi Extender and router are in the same room while installing your mywifiext net setup.
  • Plug the Netgear extender into the power outlet and wait for power led light to go green.
  • Push the W.P.S button on the router and simultaneously on your wireless extender to link up.
  • Wait for 2-3 minutes, when the W.P.S process is completed Netgear Range Extender will give three solid green lights which confirm that your extender is connected successfully with your existing wireless network.
  • Place the Wifi extender where you want and fix the dead spots of your home or office.

 

Note – If your router didn’t have the Wireless protected setup (W.P.S) button then follow this below process to setup Netgear extender.

 

MANUAL INSTALLATION

 

Setup Mywifiext

 

  • Plug the Netgear extender into the power outlet and wait for the power led light to go green.
  • Use a Laptop or a smartphone and go to the wireless setting option of your respective device.
  • In the wireless setting option, you will see a network name ‘Netgear_Ext’.
  • Connect your device with Netgear_Ext network and it will give you a login screen of New extender setup.
  • Create an account and follow the instruction to setup the wireless range extender.
  • When the installation process is completed wifi extender will give three solid green lights which confirm that your extender is connected successfully to your existing wireless network.
  • Plug the extender where you want and connect your peripheral devices with the Netgear booster to fix the connectivity problems throughout your home or office.

 

Note – After following this above installation process if you still face any difficulties to set up mywifiext.net. Call us – 1-800-571-0683 or email – support@mywifi-exts.net. Our technical of mywifi-exts.net expertise will guide you through to install your range extender.

4 Sureshot Ways to Setup & Configure NetGear Wireless Router

NetGear Wireless Router

4 Sureshot Ways to Setup & Configure NetGear Wireless Router

A wireless router tends to act as an entryway moreover as a wireless access purpose liable for connecting 2 devices over the network. At a similar time, to be additional specific a similar Netgear wireless router setup additionally tends to act as a passage between computers and a decent variety of different peripheral devices with a high-speed electronic equipment known as MODEM. So, because it finishes up being the case configuration of a Netgear Wireless Router ends up permitting wireless devices to induce connected over a network. Wherein, every router lands up self-praise of a distinct vary looking on the necessity of its purchasers.

To assemble a Netgear router, one must make sure the router is about up with a network via Ethernet Cable. This step to a precise extent ensures all glitches relating fixing of a router is resolved with something, however, a substantial degree of ease.

 

#1 Netgear Wireless Router Setup:

The Setup tab of a Netgear router interface permits one to pick out the fundamental net settings and from there on configuring the wired and wireless networks. The Setup tab all is once more used towards putting in place a LAN and WAN information MAC & domain name address, Host Name, and alter the router’s username and password.

 

#2 Netgear Wireless Router Content Filtering:

One is that the initial setup done away with next in lines comes the Content Filtering facet. This can be one in all those options that Netgear router interface provides to limit network access to specific computers and devices on the network. Laptop users may find yourself dominant the time once the net connection is active, which internet sites will be viewed, that programs will be run and that Windows services will be used.

 

#3 Netgear Wireless Router Maintenance:

The Netgear router interface’s maintenance tab permits users to perform routine updates and repairs on a router’s software. Further, an equivalent tab is additionally used for changing an interface, modification of backup settings, and modify devices connected to the router either physically or wirelessly. The upkeep tab is extremely necessary as a result of it may be used for keeping the router in shape, resulting in a way quicker and a lot of reliable networks.

#4 Netgear Wireless Router Web Support:

You can take expert help here for setting & configuring Netgear wireless router. MyWifiEXTS has a team of experts who can help you in setting & configuring your Netgear wireless router.
Call now on 1-800-571-0683 or send email on support@mywifi-exts.net .