Connect with the NETGEAR Installation Assistant

Connect with the NETGEAR Installation Assistant

 

  1. Use a WiFi network manager on a pc or mobile device to seek out and hook up with the extender WiFi network NETGEAR_EXT(NETGEAR installation Assistant). when the reference to the pc or WiFi device is established, the Device Link semiconductor diode lights.
  2. Launch an online browser.
  3. Enter www.mywifiext.net within the address field of the browser. The New Extender Setup page displays.
  4. Click the NEW EXTENDER SETUP button. The produce Account page displays.
  5. Complete the fields on the page to line up your login credentials and click on succeeding button.
  6. Choose a WiFi network to increase and click on succeeding button.
  7. Within the countersign (Network Key) field, kind the present WiFi network countersign (also known as the passphrase or security key) and click on succeeding button.
  8. Set the network name (SSID) and countersign for your extender and click on succeeding button. Note: we tend to advocate that you simply use a distinct network name (SSID) for your extender than the network name (SSID) that your router uses. sit up for the page to show the new extended WiFi network settings, which could take up to at least one minute.
  9. Connect your pc or WiFi device to the new extended WiFi network victimization the SSID and countersign that you simply created in Steps seven and eight.
  10. ensure that your pc or WiFi device is with success connected before you click the CONTINUE button. And also check for connection through mywifiext.net
  11. Click the CONTINUE button. A message displays confirming that the extender is connected and prepared. This can be done through mywifiext.
  12. Click succeeding button. The registration page displays.
  13. Complete the registration fields and click on the end button to complete the setup. If you are doing not wish to register your extender, click the Skip Registration link. Note that you simply should register your extender before you’ll be able to use NETGEAR phone support. The standing page displays in mywifiext.
  14. Undo the extender and move it to a replacement location that’s concerning halfway between your router and also the space with a poor router WiFi signal. the placement that you simply opt for should be among the vary of your existing WiFi router network.
  15. Plug the extender into AN wall plug and sit up for the facility semiconductor diode to light-weight inexperienced.
  16. Use the Router Link semiconductor diode to assist you select a spot wherever the extender-to-router association is perfect.
  17. If the Router Link semiconductor diode doesn’t light-weight amber or inexperienced, plug the extender into AN outlet nearer to the router and take a look at once more. Keep moving the extender to retailers nearer to the router till the Router Link semiconductor diode lights amber or inexperienced.
  18. Reconnect your pc or WiFi device to the new extended WiFi network.
  19. take a look at the extended WiFi vary by moving your pc or WiFi device to the realm with a poor router WiFi signal:

a)Leave your pc or {wifi|wireless local space network|WLAN|wireless fidelity|WiFi|local area network|LAN} device within the area with a poor router WiFi signal and come to the extender.

b)Check the Device Link semiconductor diode on the extender:

◊ If the Device Link semiconductor diode is solid inexperienced or amber, your extended WiFi network reaches the realm with a poor router WiFi signal and your network setup is complete.

◊If the Device Link semiconductor diode is red, your extended WiFi network doesn’t reach the realm with a poor router WiFi signal. you need to move the pc or WiFi device nearer to the extender till the Device Link semiconductor diode turns solid inexperienced or amber.

Leave a Reply

Your email address will not be published. Required fields are marked *